Eagles International Forum

Great clifford!, thanks that will be # one priority when there.

What's the second priority?

Paul, that would be making sure Cheryl and I git some quality time with fellow bus nuts , and a few adult beverages wouldn't hurt none neither

I knew the adult beverages were going to come into play somewhere. The question is: are they 1st, 2nd, or 3rd priority? I know where my bet is.

HOME RUN! ( how does he do that! I wonder...)
You get a cold one!

Jim, forgot posting the NAPA # but it is 6895 and if you need a step down from the cleaner to the turbo let me know I have a couple of extra and will happy to send one to you


good luck
Clifford

Thanks Clifford, What I can't seem to figure out is how to change up the current plumbing to make a different filter housing work. As you know, my current filter housing intakes at the end and most of the filter housings that will flow 1600CFM intake air from the side and discharge air at the end. I was going to remove my current assembly today to check the pipe sizes, but I didn't get around to it. How did you install yours? I have a rear mounted turbo and the filter housing is hooked directly to the turbo with a Rubber 90 degree fitting out of the back side of the housing and as you know the engine location in an 01 is shifted to the Passenger side. Is the turbo 6" ?

I'll take a photo and email it to you.




good luck

Clifford

Thanks for all of your help!
Jim

Jim,

Here are some pics that Clifford wanted me to post.