Forum Announcements

Contact Informaton: ...Email: eaglesinternational.email@gmail.com .... Text: three zero three 478-3501
NOTEL These contacts will not address technical questions -- that is what this forum is for.

Registration to the forum is open to the public (*) and free from any cost or obligation. Link to the registration form: ucp.php?mode=register. Please allow up to 36 hours for your application to be processed. If you have any problems registering, please contact us via the contact information above.
(*) spambots will be deleted-- only legitimate public applications will be processed

As of 11/6/2024 the forum software platform is the latest version. The frustrating updating process is documented in this thread: viewtopic.php?t=5096

Update 1/3/2025: Happy New Year. No problems have been reported or detected.

Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.

8v71 versus 6v92 bell housing

This forum will archives technical threads that are unique to Eagle Buses. There will be one thread for general comments, but the technical threads will be locked. The intent is to have a repository for detailed technical information that can be of prime importance to an Eagle Bus Owner. New threads can only be created by the forum administrators.
Post Reply
Kentucky Steve
Posts: 400
Joined: Tue Oct 14, 2008 1:04 am
Bus Model: 1969 05 number 7900
Location: Lexington Kentucky
Contact:
Contact Kentucky Steve

Re: 8v71 versus 6v92 bell housing

Post by Kentucky Steve »

Clifford, both of these bell housings are from a 71 series. Ed took his off his 71 series that had his 6 something tranny on and mine had the manuel tranny on it. The 6v92 at Erics had the 740 tranny on it. All I took off the 92 was the flex plate and tranny.
The two bell housings in question both came off 71series. I feel like I hauled back the same bellhousing that was on my engine. All measurements and bolt pattern check the same. Not sure of a suttle difference in thickness or something not noticeable to the naked eye though.

Thanks

Kentucky Steve
Top
Post Reply

Return to “Technical Archive”