Shifter Adjustment
Posted: Mon Aug 24, 2009 6:16 pm
I need help getting my shifter adjusted. I have a 1964 Model 01. I resently had a clitch installed and the shifter seems to bottom out before it is in 2nd and 4th. It will still go if I het just right. Paul scanned and sent pictures but it is for a shifter with 2 rods. Mine has only one. On the back is a universal joint with a set screw on it. Is this where the adjustment is made or is it at the other end at the shifter? Hoping to save myself some work by attacking the right end. I have attached a photo of the transmission. Thanks for the help. http://home.mchsi.com/~ellenburg/shifter.htm