Have enjoyed and benefited greatly from much of the discussion on these forums, a lot of wisdom has been expressed here that is hard to find these days..
So, on a frame-up converted Eagle some rivets have started to pop off. A neighbor where we are visiting down south previously did metal work, including rivets, in the aviation industry. He thinks engine vibration is the cause, and has offered his expertise to help replace the missing rivets.
However, he is unable to find the type of rivets used in this build, as these are not used in the aviation industry. Perhaps someone here can point us in the right direction?
![Image](https://sargenteagle.com/media/inline/2023/11/28/rivets_outside_enginedoor.jpg)
Backside of rivet:
![Image](https://sargenteagle.com/media/inline/2023/11/28/rivets_under_enginedoor.jpg)
Another location, the rear side access door:
![Image](https://sargenteagle.com/media/inline/2023/11/28/rivets_outside_sideaccess.jpg)
And the backside:
![Image](https://sargenteagle.com/media/inline/2023/11/28/rivets_inside_sideaccess.jpg)
Has anyone seen rivets like this before? Any suggestions on where to look for these?