Announcement Block
As of 12/1/2021, a major update of the forum software was accomplished
The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email@gmail.com
Update 5/16/2024 We have been "stable" for a few days. Details of problems and reconstruction plans here: viewtopic.php?p=33804&sid=91e6bc9a093a1 ... 303#p33804
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email@gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
As of 12/1/2021, a major update of the forum software was accomplished
The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email@gmail.com
Update 5/16/2024 We have been "stable" for a few days. Details of problems and reconstruction plans here: viewtopic.php?p=33804&sid=91e6bc9a093a1 ... 303#p33804
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email@gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
Need Allison 4000 Series Wall Chart To Replace HT740
-
- Posts: 28
- Joined: Sat Sep 03, 2016 7:12 am
- Bus Model: 1990 Eagle Model 15
Re: Need Allison 4000 Series Wall Chart To Replace HT740
I discovered that part of the Wtec III wiring harness for the transmission was accidentally thrown away last summer in preparation for an auction. The missing harness section included the female main communications port connector, the three male 32 pin TCM connectors and the round touch pad shift module connector. If anyone has an idea where I might locate a Wtec III harness I'd appreciate hearing from you. Otherwise I'll have to buy the connectors separately and configure each circuit using a schematic.