Page 1 of 1
Wood Grain Control Panel
Posted: Wed Feb 11, 2009 9:53 pm
by buscrazyinFL
I'd like to put something like this on my side control panel. I have a mirrored-type plastic there now, and it scratches easily and stays dusty. Any suggestions on where I can find this? This one happened to be in a friend's Prevost...I really like the finish.
Re: Wood Grain Control Panel
Posted: Wed Feb 11, 2009 10:19 pm
by rusty
Manny, The wood grain panel would look great. Not sure where to fine it. Are you handy with a saw and sander? It's not that hard to make one. Also corian is easy to work with and makes a pretty dash.
Good luck Wayne
Re: Wood Grain Control Panel
Posted: Thu Feb 12, 2009 8:16 am
by luvrbus
Manny my H-41 had that but is was a rosewood laminate tell me what size you need I have some small pcs of the 1/4 inch rosewood that may work for you.Any hardwood supply in your area will have different types from around the world good luck
Clifford
Re: Wood Grain Control Panel
Posted: Fri Feb 13, 2009 10:27 pm
by John Mellis
Manny,
Google wood verneers & you'll get more leads than you can stand. American Woodcraft stores has some in the catalog too. Usually it is as thin as poster board used for school projects.
Re: Wood Grain Control Panel
Posted: Sun Feb 15, 2009 8:18 pm
by buscrazyinFL
Thank you guys for your suggestions. I will try the google search and if I can't find what I want that way, I will get some measurements to you Cliff.