Announcement Block
As of 12/1/2021, a major update of the forum software was accomplished
The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email@gmail.com
Update 5/27/2024 our sites were down today (we got put in GoDaddy jail again). Details and reconstruction plans here: viewtopic.php?p=33804&sid=91e6bc9a093a1 ... 303#p33804
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email@gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
As of 12/1/2021, a major update of the forum software was accomplished
The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email@gmail.com
Update 5/27/2024 our sites were down today (we got put in GoDaddy jail again). Details and reconstruction plans here: viewtopic.php?p=33804&sid=91e6bc9a093a1 ... 303#p33804
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email@gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
Greg Roberts' (forum name Eagle 20) 1989 Model 20
- Eagle 20
- Posts: 80
- Joined: Mon Oct 13, 2008 6:40 pm
- Bus Model: 1989 Eagle Model 20
6V92 DDEC II, Allison HTB748 - Contact:
Greg Roberts' (forum name Eagle 20) 1989 Model 20
Greetings fellow Eagle nuts! My conversion was substantially converted prior to the creation of this forum but I wanted to go ahead and get a project thread going and I will add photos as I can. I have just gone through a household move and many of my earlier photos are on a stored drive and CDs so I will have to add earlier photos at a later date.
Here is a link to the later photos that I just stored in Photo bucket. I will expand and link images into this thread when I get a little more time. Enjoy!
http://photobucket.com/GregRobertsEagle20
Here is a link to the later photos that I just stored in Photo bucket. I will expand and link images into this thread when I get a little more time. Enjoy!
http://photobucket.com/GregRobertsEagle20
Greg Roberts
New Mexico
1989 Eagle Model 20
6V92 DDEC II, Allison ATEC HTB 748
http://photobucket.com/GregRobertsEagle20
New Mexico
1989 Eagle Model 20
6V92 DDEC II, Allison ATEC HTB 748
http://photobucket.com/GregRobertsEagle20
-
- Club Member
- Posts: 1437
- Joined: Mon Oct 13, 2008 1:35 pm
Re: Greg Roberts' (forum name Eagle 20) 1989 Model 20
Greg hi ,have always admired your coach nice photo's,keep em coming.There will be plenty of photo opportunity in Quartzsite AZ can't wait.Job well done there Greg.
- Dreamscape
- Posts: 3046
- Joined: Mon Oct 13, 2008 1:03 pm
- FMCA #: F391238
- Bus Model: 1968 Silver Eagle Model 01
- Location: Full Timing - On The Road
Re: Greg Roberts' (forum name Eagle 20) 1989 Model 20
Greg,
Thanks for taking the time to start your project thread! That's one of many neat things about this board, it makes us very unique!
Looking forward to more posts and pictures.
Thanks for taking the time to start your project thread! That's one of many neat things about this board, it makes us very unique!
Looking forward to more posts and pictures.
Paul Lawry
Dreamscape
1968 Eagle 01 #7443
Silver 8V92 HT 740
Dreamscape Build Blog: https://dreamscapesilvereagle.wordpress.com/
Dreamscape
1968 Eagle 01 #7443
Silver 8V92 HT 740
Dreamscape Build Blog: https://dreamscapesilvereagle.wordpress.com/
- Songman
- Club Member
- Posts: 2107
- Joined: Tue Oct 07, 2008 1:48 am
- FMCA #: F404262
- Bus Model: 1993 Silver Eagle Model 15-45
- Location: Nashville, TN
- Contact:
Re: Greg Roberts' (forum name Eagle 20) 1989 Model 20
Fantastic Greg. You know I have always loved your bus and when I got my own 20 yours was the first one I started looking at. I was showing Don yesterday how yours still has the factory rear cap on it and how it looks like a little spoiler. I wish the previous owner had left mine that way in the back. It looks cool.
I have studied all of your Photobucket pictures many times. Can't wait to see the new ones you dig up.
I have studied all of your Photobucket pictures many times. Can't wait to see the new ones you dig up.
Dale Houston
1993 Eagle 15-45
Nashville, TN
1993 Eagle 15-45
Nashville, TN
-
- Club Member
- Posts: 17
- Joined: Tue Dec 02, 2008 9:20 am
- FMCA #: 333036
- Bus Model: 1969 Eagle 05
1975 Eagle 05
2005 Spartan IMECA
2010 Int Amtram skoolie - Location: Tucson, AZ
Re: Greg Roberts' (forum name Eagle 20) 1989 Model 20
Greg,
How did you get the beadboard attached to the ceiling? I am using it in my bus & could use some pointers. What you have done looks great.
Thanks
Jim
http://www.eaglespirit.us" onclick="window.open(this.href);return false;
How did you get the beadboard attached to the ceiling? I am using it in my bus & could use some pointers. What you have done looks great.
Thanks
Jim
http://www.eaglespirit.us" onclick="window.open(this.href);return false;
- Eagle 20
- Posts: 80
- Joined: Mon Oct 13, 2008 6:40 pm
- Bus Model: 1989 Eagle Model 20
6V92 DDEC II, Allison HTB748 - Contact:
Re: Greg Roberts' (forum name Eagle 20) 1989 Model 20
Thanks Jim.
I first fabricated 1" angle iron rafters at every roof bow.This allowed me to have a dropped and flat ceiling and angled at the wall juncture rather than rounded.
I then completed all of my ceiling cavity work such as A/C ducting and wiring.
Then I installed 1X2 stringers about 12" apart from front to rear.
Onto this I installed thin bender board type ply wood.
I then installed the 3" v-board that you can see. I used an air staple and nail gun with good glue to install the board. Hope this helps! - Greg
I first fabricated 1" angle iron rafters at every roof bow.This allowed me to have a dropped and flat ceiling and angled at the wall juncture rather than rounded.
I then completed all of my ceiling cavity work such as A/C ducting and wiring.
Then I installed 1X2 stringers about 12" apart from front to rear.
Onto this I installed thin bender board type ply wood.
I then installed the 3" v-board that you can see. I used an air staple and nail gun with good glue to install the board. Hope this helps! - Greg
Greg Roberts
New Mexico
1989 Eagle Model 20
6V92 DDEC II, Allison ATEC HTB 748
http://photobucket.com/GregRobertsEagle20
New Mexico
1989 Eagle Model 20
6V92 DDEC II, Allison ATEC HTB 748
http://photobucket.com/GregRobertsEagle20
- Songman
- Club Member
- Posts: 2107
- Joined: Tue Oct 07, 2008 1:48 am
- FMCA #: F404262
- Bus Model: 1993 Silver Eagle Model 15-45
- Location: Nashville, TN
- Contact:
Re: Greg Roberts' (forum name Eagle 20) 1989 Model 20
The flat ceiling with the angled corners is the way to go in my opinion. That is what I had planned as well. Gives you plenty of room for insulation, ducting, and wiring. Of course you just about have to have a roof raise to accommodate it.
Dale Houston
1993 Eagle 15-45
Nashville, TN
1993 Eagle 15-45
Nashville, TN
- Eagle 20
- Posts: 80
- Joined: Mon Oct 13, 2008 6:40 pm
- Bus Model: 1989 Eagle Model 20
6V92 DDEC II, Allison HTB748 - Contact:
Re: Greg Roberts' (forum name Eagle 20) 1989 Model 20
Exactly my feelings as well Dale. I raised the roof 8 1/2" and it was perfect. This also allowed me to use standard 81" pocket doors and gives plenty of head room for tall folks.
Songman wrote:The flat ceiling with the angled corners is the way to go in my opinion. That is what I had planned as well. Gives you plenty of room for insulation, ducting, and wiring. Of course you just about have to have a roof raise to accommodate it.
Greg Roberts
New Mexico
1989 Eagle Model 20
6V92 DDEC II, Allison ATEC HTB 748
http://photobucket.com/GregRobertsEagle20
New Mexico
1989 Eagle Model 20
6V92 DDEC II, Allison ATEC HTB 748
http://photobucket.com/GregRobertsEagle20
-
- Club Member
- Posts: 17
- Joined: Tue Dec 02, 2008 9:20 am
- FMCA #: 333036
- Bus Model: 1969 Eagle 05
1975 Eagle 05
2005 Spartan IMECA
2010 Int Amtram skoolie - Location: Tucson, AZ
Re: Greg Roberts' (forum name Eagle 20) 1989 Model 20
Thanks for the info. I haven't raised the roof on mine & I'm not wanting to. The bender board trick is good. I know someone else that did that.
Jim
Jim
- Eagle 20
- Posts: 80
- Joined: Mon Oct 13, 2008 6:40 pm
- Bus Model: 1989 Eagle Model 20
6V92 DDEC II, Allison HTB748 - Contact:
Re: Greg Roberts' (forum name Eagle 20) 1989 Model 20
Hope all are doing well! I have uploaded a few new pictures to my photobucket account for your viewing pleasure. You will see my new front bumper installation and the lower air dam that I just installed. I have also just fabricated and installed a radiator scoop to help with those long mountain pulls that we have out in the west. I also just fabricated a radiator evap cooling system but I have not taken pictures of that just yet. Have a look! http://photobucket.com/GregRobertsEagle20" onclick="window.open(this.href);return false;
Greg Roberts
New Mexico
1989 Eagle Model 20
6V92 DDEC II, Allison ATEC HTB 748
http://photobucket.com/GregRobertsEagle20
New Mexico
1989 Eagle Model 20
6V92 DDEC II, Allison ATEC HTB 748
http://photobucket.com/GregRobertsEagle20