Page 1 of 2
Model 10 Fender Flares
Posted: Mon Jul 12, 2010 12:45 pm
by bryanhes
New to the Board but know a few of you from the BCM Board. Recently purchased a 1982 Model 10. Anyone know where I could pick up wheel fender flares? I need one for sure that somewhere along the line has been replaced with a fiberglass one that is cracked. I could repair it but all the others are aluminum. Are they all interchangable as well? They appear to be.
Thanks,
Bryan
Re: Model 10 Fender Flares
Posted: Mon Jul 12, 2010 12:49 pm
by rusty
not sure about the 10 but I know on the 05 all the flares are not the same. Measure to make sure. I am sure Jefferson has the flares you need.
Jefferson 405-272-0213
Good Luck Wayne
Re: Model 10 Fender Flares
Posted: Mon Jul 12, 2010 1:15 pm
by bryanhes
Hey Wayne,
I called Ed this morning. I guess I should have said that I would like to find some for less money
. He quoted me $225 each.
Thanks,
Bryan
Re: Model 10 Fender Flares
Posted: Mon Jul 12, 2010 1:22 pm
by rusty
Brian, Call me 303-591-0372
Wayne
Re: Model 10 Fender Flares
Posted: Mon Jul 12, 2010 4:59 pm
by SmoothJazz
The fronts and the drives were the same and the bogies had a tighter radius.
Re: Model 10 Fender Flares
Posted: Mon Jul 12, 2010 10:54 pm
by luvrbus
Dave St John had some not long ago check with him
good luck
Clifford
Re: Model 10 Fender Flares
Posted: Tue Jul 13, 2010 7:35 am
by bryanhes
Clifford,
Is he on the board? I don't know who he is.
Bryan
Re: Model 10 Fender Flares
Posted: Tue Jul 13, 2010 8:27 am
by Dreamscape
Bryan,
I sent you his contact information.
Re: Model 10 Fender Flares
Posted: Tue Jul 13, 2010 9:09 am
by bryanhes
Thanks Paul
Re: Model 10 Fender Flares
Posted: Tue Jul 13, 2010 9:38 am
by luvrbus
Bryan, Daniel Murphy on the BCM board had a set for sell also,there is a special section for him sure glad you have a Eagle now and the 10 did have a 8v71 in it those dual pipes on a 8v71 sound good don't they I start mine just to hear the sound lol
good luck