Eagles International Forum

Jim, Please post the specs on your project when it's completed in the Eagle Tech section for all to view. I for one am very interested in what you are doing.

Clifford, Here is what I am up against...I got around to removing the original assembly this afternoon. As you can see, the turbo is set back from the center-line of the air cleaner brackets. With a 24" air filter housing, I need to 90degree back to the turbo and then 90 degree into the turbo. My current piping is 6", pulling air from both sides of the bus. The turbo is 5" with a rubber adapter ring making it 6". What would you do?

Here is a view from the back.

Jim, I am trying to reach George we installed a new filter system on his 01 with a 8v92 several ago but I forgot how we did it but it was the ECO system.
You need to keep the 90's out of the loop if all possiable I do remember we redone the intake and pulled air from the curb side .
I'll get back as soon as I hear or have some photos from him


good luck
Clifford

Clifford, Did you have any luck reaching George ?
Jim

Jim, George is going to give you a call and try and help with your air cleaner problem


Clifford