Announcement Block
As of 12/1/2021, a major update of the forum software was accomplished
Contact Information: ... Email: eaglesinternational.email@gmail.com ... Text: three zero three 478-3501
Update 6/1/2024 No problems reported or detected. Details of recent problems and reconstruction plans here: viewtopic.php?p=33804&sid=91e6bc9a093a1 ... 303#p33804
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email@gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
As of 12/1/2021, a major update of the forum software was accomplished
Contact Information: ... Email: eaglesinternational.email@gmail.com ... Text: three zero three 478-3501
Update 6/1/2024 No problems reported or detected. Details of recent problems and reconstruction plans here: viewtopic.php?p=33804&sid=91e6bc9a093a1 ... 303#p33804
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email@gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
Dreamscape 1968 Eagle 01
- Dreamscape
- Posts: 3046
- Joined: Mon Oct 13, 2008 1:03 pm
- FMCA #: F391238
- Bus Model: 1968 Silver Eagle Model 01
- Location: Full Timing - On The Road
Re: Dreamscape 1968 Eagle 01
Thanks Y'all!
Another shot showing some Per Lux 36A Fog Lights I installed today. I found these on eBay for an unbelievable price! I had thought about cutting holes in the bumper, then thought about it again and decided to mount them in front. I just hated to cut it.
Another shot showing some Per Lux 36A Fog Lights I installed today. I found these on eBay for an unbelievable price! I had thought about cutting holes in the bumper, then thought about it again and decided to mount them in front. I just hated to cut it.
Paul Lawry
Dreamscape
1968 Eagle 01 #7443
Silver 8V92 HT 740
Dreamscape Build Blog: https://dreamscapesilvereagle.wordpress.com/
Dreamscape
1968 Eagle 01 #7443
Silver 8V92 HT 740
Dreamscape Build Blog: https://dreamscapesilvereagle.wordpress.com/
-
- Club Member
- Posts: 120
- Joined: Tue May 18, 2010 4:18 pm
- FMCA #: F419992
- Bus Model: 1974 05 Eagle
- Location: Box Elder, S.D Yuma,AZ
Re: Dreamscape 1968 Eagle 01
Looks good Paul, been looking for some rectangle ones for mine, in a stainless case, cant seem to find any. replaced the plastic ones with some chrome but there allready rusted.
Anyway, front of your bus looks dam good.
Matt
Anyway, front of your bus looks dam good.
Matt
1974 05
Box Elder, SD
Yuma,AZ
Box Elder, SD
Yuma,AZ
- Dreamscape
- Posts: 3046
- Joined: Mon Oct 13, 2008 1:03 pm
- FMCA #: F391238
- Bus Model: 1968 Silver Eagle Model 01
- Location: Full Timing - On The Road
Re: Dreamscape 1968 Eagle 01
Matt, I just sent you a link to some on eBay. Thanks for the kind words!
I still have some work to do on the front, but it's getting there!
I still have some work to do on the front, but it's getting there!
Paul Lawry
Dreamscape
1968 Eagle 01 #7443
Silver 8V92 HT 740
Dreamscape Build Blog: https://dreamscapesilvereagle.wordpress.com/
Dreamscape
1968 Eagle 01 #7443
Silver 8V92 HT 740
Dreamscape Build Blog: https://dreamscapesilvereagle.wordpress.com/
-
- Club Member
- Posts: 558
- Joined: Thu Oct 29, 2009 10:42 pm
Re: Dreamscape 1968 Eagle 01
Man, Paul...... Sure Sounded Like You Got Some Rubber When It Hit Second
VERY COOL !!!!!!!!
10-4
MrBreeze
VERY COOL !!!!!!!!
10-4
MrBreeze
John & Stephanie
1972 Silver Eagle 05 8V71 4 Speed Man.(TRAILWAYS)
1984 Eagle 10 45 Foot... 60 Series / B500
1972 Silver Eagle 05 8V71 4 Speed Man.(TRAILWAYS)
1984 Eagle 10 45 Foot... 60 Series / B500
- Dreamscape
- Posts: 3046
- Joined: Mon Oct 13, 2008 1:03 pm
- FMCA #: F391238
- Bus Model: 1968 Silver Eagle Model 01
- Location: Full Timing - On The Road
Re: Dreamscape 1968 Eagle 01
John, I'll have to go out for another run and see if it will do it again!
Paul Lawry
Dreamscape
1968 Eagle 01 #7443
Silver 8V92 HT 740
Dreamscape Build Blog: https://dreamscapesilvereagle.wordpress.com/
Dreamscape
1968 Eagle 01 #7443
Silver 8V92 HT 740
Dreamscape Build Blog: https://dreamscapesilvereagle.wordpress.com/
- Dreamscape
- Posts: 3046
- Joined: Mon Oct 13, 2008 1:03 pm
- FMCA #: F391238
- Bus Model: 1968 Silver Eagle Model 01
- Location: Full Timing - On The Road
Re: Dreamscape 1968 Eagle 01
Just a quick update.
On our way down to Salem, OR from Vancouver, WA yesterday this was the first trip fully loaded pulling our Jeep since the swap. I noticed that our top speed was no where near what it had been before. Foot to the floor on the air throttle pedal and could barely stay at 55 MPH. We stopped at the rest stop on I-5 in Wilsonville, OR and changed the psi setting on the regulator from 85 psi to 100 psi. I'm going to remove that regulator when we get to Crater Lake RV Park and just let 'er rip!
Other than that, she sure is a pleasure to drive. I had to chuckle at this. We pulled off I-5 heading to Hee Hee Illahee RV Resort and my left foot wanted to stab the clutch pedal. I guess habits are hard to break!
We'll be here for a week or so then on to our host job.
On our way down to Salem, OR from Vancouver, WA yesterday this was the first trip fully loaded pulling our Jeep since the swap. I noticed that our top speed was no where near what it had been before. Foot to the floor on the air throttle pedal and could barely stay at 55 MPH. We stopped at the rest stop on I-5 in Wilsonville, OR and changed the psi setting on the regulator from 85 psi to 100 psi. I'm going to remove that regulator when we get to Crater Lake RV Park and just let 'er rip!
Other than that, she sure is a pleasure to drive. I had to chuckle at this. We pulled off I-5 heading to Hee Hee Illahee RV Resort and my left foot wanted to stab the clutch pedal. I guess habits are hard to break!
We'll be here for a week or so then on to our host job.
Paul Lawry
Dreamscape
1968 Eagle 01 #7443
Silver 8V92 HT 740
Dreamscape Build Blog: https://dreamscapesilvereagle.wordpress.com/
Dreamscape
1968 Eagle 01 #7443
Silver 8V92 HT 740
Dreamscape Build Blog: https://dreamscapesilvereagle.wordpress.com/
- Eagle Andy
- Club Member
- Posts: 1024
- Joined: Tue Oct 14, 2008 4:37 pm
- FMCA #: F299044
- Bus Model: 1968 SE Model 05
- Location: Miles city Mt
Re: Dreamscape 1968 Eagle 01
Paul is your linkage arm moving the throttle all the way to the stop? just a thought.
Andy Wright 68 Silver Eagle Model 5 8V92 #7481
- gpzzdrm
- Club Member
- Posts: 543
- Joined: Fri Oct 10, 2008 1:25 pm
- FMCA #: F251204
- Bus Model: 1978 - 05 / Cummins ISM 450 / Allison HT740
- Location: Carson City, NV
Re: Dreamscape 1968 Eagle 01
Paul,
Way back when (8V71 days), I had an air throttle with a regulator. I had to set mine at 60#. The air throttle applied full throttle at that pressure. Originally, like you, I had it set for 80#. Apparently, there was a loss between the throttle and the linkage on the engine, but further, the pressure variation of the D2 governor, seldom allowed full throttle pressure to the linkage. I would suggest you lower the regulator pressure and adjust the linkage accordingly. See how that helps.
Bill
Way back when (8V71 days), I had an air throttle with a regulator. I had to set mine at 60#. The air throttle applied full throttle at that pressure. Originally, like you, I had it set for 80#. Apparently, there was a loss between the throttle and the linkage on the engine, but further, the pressure variation of the D2 governor, seldom allowed full throttle pressure to the linkage. I would suggest you lower the regulator pressure and adjust the linkage accordingly. See how that helps.
Bill
1978 05 Eagle with 450HP Cummins ISM / Allison HT740
Started in 1996 and still an in-progress hobby.
Started in 1996 and still an in-progress hobby.
- Dreamscape
- Posts: 3046
- Joined: Mon Oct 13, 2008 1:03 pm
- FMCA #: F391238
- Bus Model: 1968 Silver Eagle Model 01
- Location: Full Timing - On The Road
Re: Dreamscape 1968 Eagle 01
The air throttle and linkage is allowing the governor to reach full throttle when it was set up. It is just the air pressure. I will play with it and see what happens. I think a lower pressure would make it worse. I may even remove the regulator. I will find out where it will be happy and leave it.
Paul Lawry
Dreamscape
1968 Eagle 01 #7443
Silver 8V92 HT 740
Dreamscape Build Blog: https://dreamscapesilvereagle.wordpress.com/
Dreamscape
1968 Eagle 01 #7443
Silver 8V92 HT 740
Dreamscape Build Blog: https://dreamscapesilvereagle.wordpress.com/
- Eagle Andy
- Club Member
- Posts: 1024
- Joined: Tue Oct 14, 2008 4:37 pm
- FMCA #: F299044
- Bus Model: 1968 SE Model 05
- Location: Miles city Mt
Re: Dreamscape 1968 Eagle 01
Paul i have a regulator and it's sets on 100 psi and have no problem
Andy Wright 68 Silver Eagle Model 5 8V92 #7481