Hi All,
I have decided to remove the hydraulic fan drive system from the 89 Eagle model 20. If anyone is interested, let me know. I can also be emailed at eaglebus8920@yahoo.com. I was able to remove all the components without any damage. If you plan on having it shipped the pump is very heavy. Most of the lines look to be in good shape, but I think I would replace them to be on the safe side.
Items included
All the feed and return lines
hydraulic pump, 2 belt sheave and the swivel mount bracket
storage tank
sight glass
fill brkt n cap
fan drive pump
Thanks for looking
Duane & Cher
89 Eagle Model 20
6v92T DDEC II
Announcement Block
As of 12/1/2021, a major update of the forum software was accomplished
Update: 3/7/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email at gmail.com
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email at gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
As of 12/1/2021, a major update of the forum software was accomplished
Update: 3/7/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email at gmail.com
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email at gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
89 Eagle Model 20 Hydraulic Fan Drive System
-
- Club Member
- Posts: 78
- Joined: Mon Oct 13, 2008 5:01 pm
- FMCA #: F294729
- Bus Model: 1989 Eagle Model 20
40 ft
6v92 DDEC II Allision HT 748R
6" Roof Raise, 2 slides outs , center door entry. - Location: St. Louis, MO
- beltguy
- Site Admin
- Posts: 2663
- Joined: Wed Oct 08, 2008 4:39 am
- FMCA #: F246286
- Bus Model: 1985 Eagle 10 with Series 60 and Eaton AutoShift 10 speed transmission (SOLD)
- Location: Evergreen, CO
- Contact:
Re: 89 Eagle Model 20 Hydraulic Fan Drive System
Duane, it sounds like the pump is dedicated to the fan only and is belt driven.
I am thinking about going to a hyd. fan on my charge air cooler.
Would it be possible to send me (or post) a picture of the components (emphasis on pump). If you send via email, send to jim at rvsafetysystems dot com
How much are you asking?
Jim
I am thinking about going to a hyd. fan on my charge air cooler.
Would it be possible to send me (or post) a picture of the components (emphasis on pump). If you send via email, send to jim at rvsafetysystems dot com
How much are you asking?
Jim
Jim Shepherd
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com NOTE this email box is only for general correspondence related to the forum and not technical advice. Technical questions will not receive a response.
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com NOTE this email box is only for general correspondence related to the forum and not technical advice. Technical questions will not receive a response.