I am about to redo my very unique clutch system. I currently use hydraulic cylinder and slave cylinder and that will remain the same. What will change is my use of a treadle valve/air brake chamber combined with an lever for hand actuation (don't ask). I have gotten pretty good at operating the clutch, but I am about the only person in the world that can work it properly.
I am going to rig up a clutch similar to what Brian Diehl did:
http://home.earthlink.net/~diehls0792_1 ... ion10.html
The clutch system he manufactured uses a hanging pedal, linkage down to the service bay below the driver and a vacuum chamber/master cylinder (along with a vacuum pump). BTW, that project page is a great read - especially how he picked up the engine/transmission.
I want to use the floor clutch pedal system that Eagle used. I have the bearing brackets covered, but I would like to save the fabrication time on the pedal/arm if someone has one that they have removed.
That darn Bob Gilbert got me started on this project . He said that IHC S1700 trucks had a great vacum pump/chamber system on trucks with diesel engines and hydraulic brakes. Still have to visit the local salvage yard to see if I can find one.
Jim
Announcement Block
As of 12/1/2021, a major update of the forum software was accomplished
Update: 3/7/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email at gmail.com
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email at gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
As of 12/1/2021, a major update of the forum software was accomplished
Update: 3/7/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email at gmail.com
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email at gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
Need Clutch Pedal and Arm
- beltguy
- Site Admin
- Posts: 2667
- Joined: Wed Oct 08, 2008 4:39 am
- FMCA #: F246286
- Bus Model: 1985 Eagle 10 with Series 60 and Eaton AutoShift 10 speed transmission (SOLD)
- Location: Evergreen, CO
- Contact:
Need Clutch Pedal and Arm
Jim Shepherd
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com NOTE this email box is only for general correspondence related to the forum and not technical advice. Technical questions will not receive a response.
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com NOTE this email box is only for general correspondence related to the forum and not technical advice. Technical questions will not receive a response.
- beltguy
- Site Admin
- Posts: 2667
- Joined: Wed Oct 08, 2008 4:39 am
- FMCA #: F246286
- Bus Model: 1985 Eagle 10 with Series 60 and Eaton AutoShift 10 speed transmission (SOLD)
- Location: Evergreen, CO
- Contact:
Re: Need Clutch Pedal and Arm
Thought I would bring this to the top again.
If anyone has removed the clutch arm from their 05/10 (01?) I would sure love to have it. the part I am looking for is the clutch pedal and arm that pivots under the driver's floor.
This project is down the line a bit, but would like to gather the parts.
Jim
If anyone has removed the clutch arm from their 05/10 (01?) I would sure love to have it. the part I am looking for is the clutch pedal and arm that pivots under the driver's floor.
This project is down the line a bit, but would like to gather the parts.
Jim
Jim Shepherd
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com NOTE this email box is only for general correspondence related to the forum and not technical advice. Technical questions will not receive a response.
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com NOTE this email box is only for general correspondence related to the forum and not technical advice. Technical questions will not receive a response.
- beltguy
- Site Admin
- Posts: 2667
- Joined: Wed Oct 08, 2008 4:39 am
- FMCA #: F246286
- Bus Model: 1985 Eagle 10 with Series 60 and Eaton AutoShift 10 speed transmission (SOLD)
- Location: Evergreen, CO
- Contact:
Re: Need Clutch Pedal and Arm
Just to clarify, I need the pedal, arm, and (if possible) the bearings shown on the left hand side of the photo. I would love to have the other parts, but the pedal/arm/bearings are my main focus.
Jim
Jim
Jim Shepherd
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com NOTE this email box is only for general correspondence related to the forum and not technical advice. Technical questions will not receive a response.
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com NOTE this email box is only for general correspondence related to the forum and not technical advice. Technical questions will not receive a response.
-
- Board Member
- Posts: 54
- Joined: Tue Oct 14, 2008 11:24 am
- FMCA #: f367175
- Bus Model: 1977 05 roof raised 7" 10 speed roadranger manual
- Location: Wagoner, OK
Re: Need Clutch Pedal and Arm
Hey Jim, if you can wait until April I got you covered. I have all the parts you need in a parts bus, just have to take them out and send them to you or bring them to the next rally.
BTW I haven't got to use your Prolink since Bowie but have located some M11 trucks in Phoenix that I will try to check out wile I am in Q.
Bob Gilbert
BTW I haven't got to use your Prolink since Bowie but have located some M11 trucks in Phoenix that I will try to check out wile I am in Q.
Bob Gilbert
- beltguy
- Site Admin
- Posts: 2667
- Joined: Wed Oct 08, 2008 4:39 am
- FMCA #: F246286
- Bus Model: 1985 Eagle 10 with Series 60 and Eaton AutoShift 10 speed transmission (SOLD)
- Location: Evergreen, CO
- Contact:
Re: Need Clutch Pedal and Arm
Bob, realistically, I will probably not get to this project till that time frame. Thanks for the offer.
As you probably know, I will not be in Quartzsite this year. Keep the ProLink with you and we will work on getting it back when you are done with it.
Jim
As you probably know, I will not be in Quartzsite this year. Keep the ProLink with you and we will work on getting it back when you are done with it.
Jim
Jim Shepherd
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com NOTE this email box is only for general correspondence related to the forum and not technical advice. Technical questions will not receive a response.
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com NOTE this email box is only for general correspondence related to the forum and not technical advice. Technical questions will not receive a response.