Announcement Block
As of 12/1/2021, a major update of the forum software was accomplished
Update: 3/7/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email at gmail.com
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email at gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
As of 12/1/2021, a major update of the forum software was accomplished
Update: 3/7/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email at gmail.com
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email at gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
REAR TORSION BAR
-
- Club Member
- Posts: 70
- Joined: Sat Sep 05, 2009 8:55 am
- FMCA #: f208485
- Bus Model: 1984 eagle model 10 #408217
REAR TORSION BAR
LOOKING FOR REAR TORSION BAR ON MODEL 10. ANY HELP IS APPRECITED. THANKS,MARK
-
- Posts: 390
- Joined: Mon Oct 13, 2008 1:49 pm
- Location: Brownsville, Texas
Re: REAR TORSION BAR
Mark,
Craig at Silver Eagle can get you new drive torsions. You can reach Craig at 615/346-9303. If you are looking for a good used one, Franky Goodson at Goodson Bus Sales might have one. He can be reached at 828/428-4102.
Craig at Silver Eagle can get you new drive torsions. You can reach Craig at 615/346-9303. If you are looking for a good used one, Franky Goodson at Goodson Bus Sales might have one. He can be reached at 828/428-4102.
Daniel Lenz
Brownsville, Texas
The work of an unknown good man is like a vein of water flowing hidden underground, secretly making the ground greener.
Brownsville, Texas
The work of an unknown good man is like a vein of water flowing hidden underground, secretly making the ground greener.
- luvrbus
- Club Member
- Posts: 2981
- Joined: Mon Oct 13, 2008 12:50 pm
- FMCA #: F262917
- Bus Model: 05
Re: REAR TORSION BAR
Mark, I spoke with Sonnie Gray he knows where 2 are in Texas at a good price he will check for you Mon and also on the board here Dale posted a finding of a guy that would take 600 bucks for the complete rear in CA with the torsion it is listed in the mall section .
Can you tell us whats wrong with yours Jefferson can repair certain parts on the unit.
good luck
Clifford
Can you tell us whats wrong with yours Jefferson can repair certain parts on the unit.
good luck
Clifford
-
- Club Member
- Posts: 70
- Joined: Sat Sep 05, 2009 8:55 am
- FMCA #: f208485
- Bus Model: 1984 eagle model 10 #408217
Re: REAR TORSION BAR
HI CLIFFORD, I AM STILL WORKING ON FREEING UP MINE, BUT I THINK IT HAS BEEN DOWN SO LONG THAT THE ADJUSTMENT IS FROZEN THAT IT WILL JUST SIT RIGHT BACK DOWN. I AM WAITING ON SOME KROIL TO TRY.I THOUGHT I WOULD BUT OUT FEELERS TO SEE WHAT WAS OUT THERE AND AT WHAT COST.I HAVE FOUND SOME ON THE EAST COAST,BUT SURLY MADE OF GOLD, SHIPPING IS A CONSERN BECAUSE OF WEIGHT THOUGH. THANKS MARK
- luvrbus
- Club Member
- Posts: 2981
- Joined: Mon Oct 13, 2008 12:50 pm
- FMCA #: F262917
- Bus Model: 05
Re: REAR TORSION BAR
Mark, we have a good network here and I bet someone going to FL this winter will help get you one if needed to the east coast.FWIW if the rubber is not out 2 or 3 inches on each end they will not settle back down but very little
good luck
Clifford
good luck
Clifford
Last edited by luvrbus on Sun Sep 13, 2009 9:15 am, edited 1 time in total.
-
- Club Member
- Posts: 70
- Joined: Sat Sep 05, 2009 8:55 am
- FMCA #: f208485
- Bus Model: 1984 eagle model 10 #408217
Re: REAR TORSION BAR
clifford, thanks for the help,please let me know what sonnie finds out.thanks mark
-
- Club Member
- Posts: 70
- Joined: Sat Sep 05, 2009 8:55 am
- FMCA #: f208485
- Bus Model: 1984 eagle model 10 #408217
Re: REAR TORSION BAR
CLIFFORD, HOPE YOU ARE RIGHT ,but last year i adjusted that side up, and it settled back down farther than it was when i started. i tried to cheat though, i didn't adjust the bogie, which i found out this spring was way out,1200 lbs,they are both 3100lbs now.
- luvrbus
- Club Member
- Posts: 2981
- Joined: Mon Oct 13, 2008 12:50 pm
- FMCA #: F262917
- Bus Model: 05
Re: REAR TORSION BAR
Mark, another thing you can do is reindex the the rears also it is a PITA but Trailways did it for years for more wear.
good luck
Clifford
good luck
Clifford
-
- Club Member
- Posts: 70
- Joined: Sat Sep 05, 2009 8:55 am
- FMCA #: f208485
- Bus Model: 1984 eagle model 10 #408217
Re: REAR TORSION BAR
I WOULD BE INTERESTED IN KNOWING HOW TO RE-index the drives.if anyone knows the procedure.mine does't have any rubber hanging out either side .thanks
- luvrbus
- Club Member
- Posts: 2981
- Joined: Mon Oct 13, 2008 12:50 pm
- FMCA #: F262917
- Bus Model: 05
Re: REAR TORSION BAR
Mark, I spoke with Sonnie give him a call @1-903-815-2141 he got a good price for you on the torsion bars and he is planning on going east in Dec
good luck
Clifford
good luck
Clifford