Announcement Block
As of 12/1/2021, a major update of the forum software was accomplished
Update: 4/20/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email@gmail.com (This link seems to work for my outlook email, but may not work for other email platforms. If it does not load, copy and paste the link in your platform.)
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email@gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
As of 12/1/2021, a major update of the forum software was accomplished
Update: 4/20/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email@gmail.com (This link seems to work for my outlook email, but may not work for other email platforms. If it does not load, copy and paste the link in your platform.)
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email@gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
AllisonTrans Temperature Sender
-
- Posts: 16
- Joined: Sat Feb 21, 2009 5:39 am
- FMCA #: 401729
- Bus Model: 1984 Eagle 10, 6V92 Allison 740
- Location: Lancaster Co, PA
- Contact:
AllisonTrans Temperature Sender
Hoping someone can shed some light on this issue. I have a 1984 Model 10 #20XXX with an Allison HT740-D and a 6V92. To the best of my knowledge they are both the stock units. The trans temp guage has not worked since I bought the coach. I have checked the guage and it functions OK, I have traced the wire to the front panel (#148) and it appears OK. I can't find the temperature sender on the trans though. I have two small devices near the bottom of the trans on the drivers side just above the oil pan, I assume backup light switch or similar? Both are two pin connectors and only one is in use. I also have what I assume is the speedometer sender mounted to the tailpiece of the trans. I have inspected the trans oil cooler housing after searching the boards and no sending units there. Where else can I look? What am I missing here? I assume if I have the guage and wiring that it must have functioned at one time...
- luvrbus
- Club Member
- Posts: 2981
- Joined: Mon Oct 13, 2008 12:50 pm
- FMCA #: F262917
- Bus Model: 05
Re: AllisonTrans Temperature Sender
Sorry Kurt I didn't see your post here and answered you on the mak board, the sender is on top of the transmission about 1 o'clock high on the drivers side with 1 wire
Clifford
Clifford
- Boomer
- Club Member
- Posts: 780
- Joined: Mon Nov 17, 2008 12:26 am
- FMCA #: F352905
- Bus Model: 1981 Eagle M10. Stretched, widened, raised to M15/45 specs. Cummins ISM 450, Allison World transmission. Mid entry door.
- Location: Southwest Washington
Re: AllisonTrans Temperature Sender
The other two switches are the neutral safety switch and the backup switch.