Website Home | Info & Posts | Club Membership | Eagle History | Contact Us

AllisonTrans Temperature Sender

This is a public forum to discuss Eagle related technical issues. If you are having a problem with your Eagle, this is the place to find help.
AllisonTrans Temperature Sender
Sat May 16, 2009 11:48 am


Hoping someone can shed some light on this issue. I have a 1984 Model 10 #20XXX with an Allison HT740-D and a 6V92. To the best of my knowledge they are both the stock units. The trans temp guage has not worked since I bought the coach. I have checked the guage and it functions OK, I have traced the wire to the front panel (#148) and it appears OK. I can't find the temperature sender on the trans though. I have two small devices near the bottom of the trans on the drivers side just above the oil pan, I assume backup light switch or similar? Both are two pin connectors and only one is in use. I also have what I assume is the speedometer sender mounted to the tailpiece of the trans. I have inspected the trans oil cooler housing after searching the boards and no sending units there. Where else can I look? What am I missing here? I assume if I have the guage and wiring that it must have functioned at one time...
kcld
 
Posts: 16
Joined: Sat Feb 21, 2009 5:39 am
Location: Lancaster Co, PA


Re: AllisonTrans Temperature Sender
Sat May 16, 2009 2:06 pm


Sorry Kurt I didn't see your post here and answered you on the mak board, the sender is on top of the transmission about 1 o'clock high on the drivers side with 1 wire

Clifford
User avatar
luvrbus
Club Member
Club Member
 
Posts: 2939
Joined: Mon Oct 13, 2008 12:50 pm


Re: AllisonTrans Temperature Sender
Sat May 16, 2009 7:42 pm


The other two switches are the neutral safety switch and the backup switch.
User avatar
Boomer
Club Member
Club Member
 
Posts: 778
Joined: Mon Nov 17, 2008 12:26 am
Location: Southwest Washington



Return to Eagle Tech

Who is online

Users browsing this forum: No registered users and 2 guests