Announcement Block
As of 12/1/2021, a major update of the forum software was accomplished
Update: 3/7/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email at gmail.com
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email at gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
As of 12/1/2021, a major update of the forum software was accomplished
Update: 3/7/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email at gmail.com
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email at gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
Wheel bearing grease
- ericbsc
- Moderator
- Posts: 743
- Joined: Wed Dec 24, 2008 8:31 pm
- FMCA #: 12345678
- Bus Model: 1973 Eagle 05
- Location: Boiling Springs, SC
Wheel bearing grease
What is typically used when packing wheel bearings? I pulled the bogie hubs to replace bogie hubs to replace studs. Looks like gear oil?
Eric Brown
Spartanburg, SC
1973 05
Series 60 allison 4000MHP
Spartanburg, SC
1973 05
Series 60 allison 4000MHP
- luvrbus
- Club Member
- Posts: 2981
- Joined: Mon Oct 13, 2008 12:50 pm
- FMCA #: F262917
- Bus Model: 05
Re: Wheel bearing grease
Eric, if you have oil bath seals it is 90w most of us use the gear oil for the front and boogies good luck
- Boomer
- Club Member
- Posts: 780
- Joined: Mon Nov 17, 2008 12:26 am
- FMCA #: F352905
- Bus Model: 1981 Eagle M10. Stretched, widened, raised to M15/45 specs. Cummins ISM 450, Allison World transmission. Mid entry door.
- Location: Southwest Washington
Re: Wheel bearing grease
I use 80W90, which is what I run in the differential. Then I top off with Powerpunch. It's a good product and is easy to carry and use. In the one quart squeeze bottle. Back when I ran 2 strokes, it was also an emergency back up fix to prime the fuel system too. The nipple is just right to fit into the fuel lines.