Just wondering how hard it is to change the fan belts. Not sure when mine were done last and I would like to put new ones in. There doesn't seem to be alot of room to work with. Has anyone tackled this? What is the best way to do it?
I would also like to change the alternator belts, but those seem simpler to do.
Announcement Block
As of 12/1/2021, a major update of the forum software was accomplished
Update: 3/7/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email at gmail.com
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email at gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
As of 12/1/2021, a major update of the forum software was accomplished
Update: 3/7/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email at gmail.com
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email at gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
Fan Belts
- buscrazyinFL
- Club Member
- Posts: 655
- Joined: Tue Nov 04, 2008 8:47 pm
- FMCA #: F385289
- Bus Model: 1972 Eagle 05
Vin # 8851 - Location: Winter Haven, FL
Fan Belts
Manny & Darlene's
1972 Silver Eagle 05
VIN # 8851
8V71 / HT740 4 Speed Automatic
1972 Silver Eagle 05
VIN # 8851
8V71 / HT740 4 Speed Automatic
- luvrbus
- Club Member
- Posts: 2981
- Joined: Mon Oct 13, 2008 12:50 pm
- FMCA #: F262917
- Bus Model: 05
Re: Fan Belts
Manny, it is about a 1hr job the hardest part is get the ider pulley bolt loose that makes the belt adjustment,remove the mitre box drive shaft to remove and replace the new one.Fwiw buy good automotive belts the ones from the hardware stores don't last been there done that.Doyle just replaced his 3 alt belts and those were 15.00 bucks each for good belts
good luck
Clifford
good luck
Clifford