Manny, Eagle used 3 different mitre boxes if you can post a photo I can tell you how much oil each one takes. good luck
Clifford
Announcement Block
As of 12/1/2021, a major update of the forum software was accomplished
Update: 4/20/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email@gmail.com (This link seems to work for my outlook email, but may not work for other email platforms. If it does not load, copy and paste the link in your platform.)
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email@gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
As of 12/1/2021, a major update of the forum software was accomplished
Update: 4/20/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email@gmail.com (This link seems to work for my outlook email, but may not work for other email platforms. If it does not load, copy and paste the link in your platform.)
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email@gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
Miter Box
- luvrbus
- Club Member
- Posts: 2981
- Joined: Mon Oct 13, 2008 12:50 pm
- FMCA #: F262917
- Bus Model: 05
- Boomer
- Club Member
- Posts: 780
- Joined: Mon Nov 17, 2008 12:26 am
- FMCA #: F352905
- Bus Model: 1981 Eagle M10. Stretched, widened, raised to M15/45 specs. Cummins ISM 450, Allison World transmission. Mid entry door.
- Location: Southwest Washington
Re: Miter Box
Manny, in the picture of the dipstick I sent, you will notice a o-ring on the stick, this keeps oil from blowing back up the dipstick tube. There is a tiny hole in the plastic part which allows the box to breath. Fill and drain through the pipe plugs.
- Boomer
- Club Member
- Posts: 780
- Joined: Mon Nov 17, 2008 12:26 am
- FMCA #: F352905
- Bus Model: 1981 Eagle M10. Stretched, widened, raised to M15/45 specs. Cummins ISM 450, Allison World transmission. Mid entry door.
- Location: Southwest Washington
Re: Miter Box
I found my Morse Gearbox lubrication bulletin. It says:
Model of gearbox Oil capacity
4M 1/4 pint
6M 1 quart
8M 2 quarts
12M 1 1/2 gallons
Manny, I will PM a copy of this to you.
Hope this helps
Model of gearbox Oil capacity
4M 1/4 pint
6M 1 quart
8M 2 quarts
12M 1 1/2 gallons
Manny, I will PM a copy of this to you.
Hope this helps
- buscrazyinFL
- Club Member
- Posts: 655
- Joined: Tue Nov 04, 2008 8:47 pm
- FMCA #: F385289
- Bus Model: 1972 Eagle 05
Vin # 8851 - Location: Winter Haven, FL
Re: Miter Box
Clifford I will try to take a pic tommorow or this weekend thanks. Mark thanks for the Emails. I will be working on my Eagle this weekend I hope.
Manny & Darlene's
1972 Silver Eagle 05
VIN # 8851
8V71 / HT740 4 Speed Automatic
1972 Silver Eagle 05
VIN # 8851
8V71 / HT740 4 Speed Automatic
- buscrazyinFL
- Club Member
- Posts: 655
- Joined: Tue Nov 04, 2008 8:47 pm
- FMCA #: F385289
- Bus Model: 1972 Eagle 05
Vin # 8851 - Location: Winter Haven, FL
Re: Miter Box
I went ahead and installed the fill tube in the miter box and that went well. Then I drilled a hole on the dip stick handle to let air out, like in Boomer's pic above. I did all this at the garage where I store my bus. Then tonight I brought my bus home so I can finish installing my cruise control tomorrow (that will be another project eagle post). Anyway, when I got home I opened the engine compartment and there was no oil spilled out anywhere.
Last edited by buscrazyinFL on Sun Mar 22, 2009 5:59 pm, edited 2 times in total.
Manny & Darlene's
1972 Silver Eagle 05
VIN # 8851
8V71 / HT740 4 Speed Automatic
1972 Silver Eagle 05
VIN # 8851
8V71 / HT740 4 Speed Automatic
- buscrazyinFL
- Club Member
- Posts: 655
- Joined: Tue Nov 04, 2008 8:47 pm
- FMCA #: F385289
- Bus Model: 1972 Eagle 05
Vin # 8851 - Location: Winter Haven, FL
Re: Miter Box
Ok, here are the pictures you asked for Clifford. Can you tell me how much oil this type of miter box takes?
Manny & Darlene's
1972 Silver Eagle 05
VIN # 8851
8V71 / HT740 4 Speed Automatic
1972 Silver Eagle 05
VIN # 8851
8V71 / HT740 4 Speed Automatic
- luvrbus
- Club Member
- Posts: 2981
- Joined: Mon Oct 13, 2008 12:50 pm
- FMCA #: F262917
- Bus Model: 05
Re: Miter Box
Manny, I use 3.5 qts in mine your is the same.If you need a new breather for yours if the dipstick starts leaking I have a couple of new ones and will send you one.I have a couple more Eagles here now and will check the speedometers for the vin number and see if they have the number on the back and get back to you good luck
Clifford
Clifford