I had occasion to look for the wheel alignment specifications in the electronic version of my Eagle Manual (Don't have the hard copy with me).
I found the specs for the bogie, but not the front end.
Does anyone have the factory specifications for a Model 10?
Jim
Announcement Block
As of 12/1/2021, a major update of the forum software was accomplished
Update: 4/20/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email@gmail.com (This link seems to work for my outlook email, but may not work for other email platforms. If it does not load, copy and paste the link in your platform.)
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email@gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
As of 12/1/2021, a major update of the forum software was accomplished
Update: 4/20/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email@gmail.com (This link seems to work for my outlook email, but may not work for other email platforms. If it does not load, copy and paste the link in your platform.)
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email@gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
Wheel Alignment Specifications?
- beltguy
- Site Admin
- Posts: 2668
- Joined: Wed Oct 08, 2008 4:39 am
- FMCA #: F246286
- Bus Model: 1985 Eagle 10 with Series 60 and Eaton AutoShift 10 speed transmission (SOLD)
- Location: Evergreen, CO
- Contact:
Wheel Alignment Specifications?
Jim Shepherd
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com NOTE this email box is only for general correspondence related to the forum and not technical advice. Technical questions will not receive a response.
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com NOTE this email box is only for general correspondence related to the forum and not technical advice. Technical questions will not receive a response.
- luvrbus
- Club Member
- Posts: 2981
- Joined: Mon Oct 13, 2008 12:50 pm
- FMCA #: F262917
- Bus Model: 05
Re: Wheel Alignment Specifications?
Sure Jim
toe-in 0 to 1/16"
caster +1 to+2 degree
camber +.25 to +.75 degree
Clifford
toe-in 0 to 1/16"
caster +1 to+2 degree
camber +.25 to +.75 degree
Clifford
- rhbelter
- Club Member
- Posts: 110
- Joined: Tue Nov 04, 2008 12:22 pm
- FMCA #: F92654
- Bus Model: Eagle -01 1967 Cummins M-11 10 spd OD RR
- Location: Carmel CA
Re: Wheel Alignment Specifications?
Ahoy, Eagles,
Does anyone have the front axle alignment specs for the Eagle -01 ?
Are they the same as the Eagle 10 above?
Thanks /s/ Bob
Does anyone have the front axle alignment specs for the Eagle -01 ?
Are they the same as the Eagle 10 above?
Thanks /s/ Bob
Bob Belter Carmel CA ---- Eagle -01 /w/ Cummins M-11/ Roadranger ten speed RTO1110
- luvrbus
- Club Member
- Posts: 2981
- Joined: Mon Oct 13, 2008 12:50 pm
- FMCA #: F262917
- Bus Model: 05
Re: Wheel Alignment Specifications?
Bob, sorry but I don't have anything on the 01 but just me thinking out loud here I would venture to say the 01 will be different because of the tag setup or it could be the same I don't know.
Clifford
Clifford