On the way back from Jack's party I developed a air leak in a valve that goes to both front brake cans. Does anyone have a good diagram of an 05 brake system so I can make sure I can identify the correct part. It sets in the center up high I assume it is the relay valve. No leak until brake is depressed, lot of lost air but cans still apply brakes.
Also looking for a good source of readable electrical schematics.
Lot of fun and good weather at Jack's party.
Thanks for any info and help
Ed
Announcement Block
As of 12/1/2021, a major update of the forum software was accomplished
Update: 3/7/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email at gmail.com
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email at gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
As of 12/1/2021, a major update of the forum software was accomplished
Update: 3/7/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email at gmail.com
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email at gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
Need diagram for brake system
-
- Board Member
- Posts: 179
- Joined: Sat Oct 18, 2008 8:10 pm
- FMCA #: F177108
- Bus Model: 1977 Eagle Model 05 with raised roof and model 15 caps and windshields
- Location: Murrell Inlet , SC
- Dreamscape
- Posts: 3046
- Joined: Mon Oct 13, 2008 1:03 pm
- FMCA #: F391238
- Bus Model: 1968 Silver Eagle Model 01
- Location: Full Timing - On The Road
Re: Need diagram for brake system
Hi Ed,
According to my manual, it call for a QR-1. I hope this is correct, as my manual is for 0/1, 0/5. You might try here, http://shop.easternmarine.com/index.cfm ... og.catalog, quick release valve. I got a copy of my electrical schematics from Norris at Jefferson, you might give him a call., 800.813.9367.
Glad to hear you had fun at Jack's party. Do you have any pics or stories to share?
HTH,
Paul
According to my manual, it call for a QR-1. I hope this is correct, as my manual is for 0/1, 0/5. You might try here, http://shop.easternmarine.com/index.cfm ... og.catalog, quick release valve. I got a copy of my electrical schematics from Norris at Jefferson, you might give him a call., 800.813.9367.
Glad to hear you had fun at Jack's party. Do you have any pics or stories to share?
HTH,
Paul
Paul Lawry
Dreamscape
1968 Eagle 01 #7443
Silver 8V92 HT 740
Dreamscape Build Blog: https://dreamscapesilvereagle.wordpress.com/
Dreamscape
1968 Eagle 01 #7443
Silver 8V92 HT 740
Dreamscape Build Blog: https://dreamscapesilvereagle.wordpress.com/