On the way back from Jack's party I developed a air leak in a valve that goes to both front brake cans. Does anyone have a good diagram of an 05 brake system so I can make sure I can identify the correct part. It sets in the center up high I assume it is the relay valve. No leak until brake is depressed, lot of lost air but cans still apply brakes.
Also looking for a good source of readable electrical schematics.
Lot of fun and good weather at Jack's party.
Thanks for any info and help
Ed
Announcement Block
As of 12/1/2021, a major update of the forum software was accomplished
Update: 4/20/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email@gmail.com (This link seems to work for my outlook email, but may not work for other email platforms. If it does not load, copy and paste the link in your platform.)
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email@gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
As of 12/1/2021, a major update of the forum software was accomplished
Update: 4/20/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email@gmail.com (This link seems to work for my outlook email, but may not work for other email platforms. If it does not load, copy and paste the link in your platform.)
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email@gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
Need diagram for brake system
-
77Eagle05
- Board Member
- Posts: 179
- Joined: Sat Oct 18, 2008 8:10 pm
- FMCA #: F177108
- Bus Model: 1977 Eagle Model 05 with raised roof and model 15 caps and windshields
- Location: Murrell Inlet , SC
-
Dreamscape
- Posts: 3046
- Joined: Mon Oct 13, 2008 1:03 pm
- FMCA #: F391238
- Bus Model: 1968 Silver Eagle Model 01
- Location: Full Timing - On The Road
Re: Need diagram for brake system
Hi Ed,
According to my manual, it call for a QR-1. I hope this is correct, as my manual is for 0/1, 0/5. You might try here, http://shop.easternmarine.com/index.cfm ... og.catalog, quick release valve. I got a copy of my electrical schematics from Norris at Jefferson, you might give him a call., 800.813.9367.
Glad to hear you had fun at Jack's party. Do you have any pics or stories to share?
HTH,
Paul
According to my manual, it call for a QR-1. I hope this is correct, as my manual is for 0/1, 0/5. You might try here, http://shop.easternmarine.com/index.cfm ... og.catalog, quick release valve. I got a copy of my electrical schematics from Norris at Jefferson, you might give him a call., 800.813.9367.
Glad to hear you had fun at Jack's party. Do you have any pics or stories to share?
HTH,
Paul
Paul Lawry
Dreamscape
1968 Eagle 01 #7443
Silver 8V92 HT 740
Dreamscape Build Blog: https://dreamscapesilvereagle.wordpress.com/
Dreamscape
1968 Eagle 01 #7443
Silver 8V92 HT 740
Dreamscape Build Blog: https://dreamscapesilvereagle.wordpress.com/