Announcement Block
As of 12/1/2021, a major update of the forum software was accomplished

Update: 3/7/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email at gmail.com

Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email at gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.

Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.

WHICH ENGINE???

This is a public forum to discuss Eagle related technical issues. If you are having a problem with your Eagle, this is the place to find help.
User avatar
SIVRTNGE2
Club Member
Club Member
Posts: 183
Joined: Sun Nov 02, 2008 7:25 am
FMCA #: F399257
Bus Model: (82) 94 EAGLE MODEL 10/45
Location: WHITE GEORGIA (BIG CITY)

WHICH ENGINE???

Post by SIVRTNGE2 »

What engines can be installed in an Eagle 10 without cutting the floor???
--
BILL
User avatar
beltguy
Site Admin
Site Admin
Posts: 2663
Joined: Wed Oct 08, 2008 4:39 am
FMCA #: F246286
Bus Model: 1985 Eagle 10 with Series 60 and Eaton AutoShift 10 speed transmission (SOLD)
Location: Evergreen, CO
Contact:

Re: WHICH ENGINE???

Post by beltguy »

Hi Bill.

Most folks go with the Cummins M11/ISM. Good engine and folks are quite pleased. If you make it to Quartzsite, there will be at least two of these conversions, perhaps more.

Jim
Jim Shepherd
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com   NOTE this email box is only for general correspondence related to the forum and not technical advice.  Technical questions will not receive a response.
User avatar
SIVRTNGE2
Club Member
Club Member
Posts: 183
Joined: Sun Nov 02, 2008 7:25 am
FMCA #: F399257
Bus Model: (82) 94 EAGLE MODEL 10/45
Location: WHITE GEORGIA (BIG CITY)

Re: WHICH ENGINE???

Post by SIVRTNGE2 »

Thanks Jim, How hard would it be to raise the floor in a completed coach for a 60 series??? Would an ISX work??? What is a N14??? I have found many of the engines in question and no ISM engines. I found a complete truck with a 14 liter detroit for 10,000.00. I just want to make sure I buy what will work.
--
BILL
User avatar
beltguy
Site Admin
Site Admin
Posts: 2663
Joined: Wed Oct 08, 2008 4:39 am
FMCA #: F246286
Bus Model: 1985 Eagle 10 with Series 60 and Eaton AutoShift 10 speed transmission (SOLD)
Location: Evergreen, CO
Contact:

Re: WHICH ENGINE???

Post by beltguy »

Hi Bill. Folks have put all of the big engines in an Eagle. The issues are length, and height. For the Series 60 you have to raise the bed area several inches (I raised mine 13"). That does not screw up the bedroom too bad, and makes a nice way to get to the engine. However, you need to build a truss for the floor support and then reinforce the cross member and cut out quite a bit of the original cross member. I show quite a bit of the work on my project pages listed below.

If the bus is not converted, it is not a huge deal. If it is converted, you will need to tear most everything out.

The length is real touchy. Most of that depends on the transmission you choose. You really do not want the HT740 because of gearing (1:1 in high gear). It is longer than both the AutoShift and the World transmission. With the AutoShift, I was able to use the original driveshaft and have about 2 inches clearance on the rear bumper.

Re gearing: even with a 3:36 (about $3-4K to change from a 3.73) you are not really geared very well with an HT740 (or any of the Allison transmissions with 1:1 high gear). That will put you about 1900 rpm at 72 MPH or a bit less than 1700 at 64 MPH. My opinion is that is too fast for the large 4 stroke engines who have a sweet spot of 1300 - 1500 RPM.

There was a wrecking yard in Ogden, UT that was scrapping a bunch of ISM/AutoShift trucks a couple of years ago. For reference (and a fun site) go to Brian Diehl's engine swap page (MCI, but similar): http://home.earthlink.net/~diehls0792_1 ... ion10.html

Jim
Jim Shepherd
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com   NOTE this email box is only for general correspondence related to the forum and not technical advice.  Technical questions will not receive a response.
User avatar
rusty
Moderator
Moderator
Posts: 1546
Joined: Thu Oct 09, 2008 3:22 pm
FMCA #: F341087
Bus Model: 1972 05 completed 2003
1994 15/45 in progress
Location: Johnstown Co.

Re: WHICH ENGINE???

Post by rusty »

Bill, If your bed is in the middle raising the floor is no big deal. I did not do my 05. the people that did it cut the rear frame and did not replace it with any thing. I do not recomend this how ever I have not seen any movment in the rear of the bus. See you at Quartzsite and I will show you how mine was done

Good Luck Wayne
User avatar
SIVRTNGE2
Club Member
Club Member
Posts: 183
Joined: Sun Nov 02, 2008 7:25 am
FMCA #: F399257
Bus Model: (82) 94 EAGLE MODEL 10/45
Location: WHITE GEORGIA (BIG CITY)

Re: WHICH ENGINE???

Post by SIVRTNGE2 »

Thanks Rusty, I hope to be in Quartsite this year!!!

I have searched for the salvage yard in UTAH...no success!!! If anyone can help with this info, please let me know.
--
BILL
User avatar
beltguy
Site Admin
Site Admin
Posts: 2663
Joined: Wed Oct 08, 2008 4:39 am
FMCA #: F246286
Bus Model: 1985 Eagle 10 with Series 60 and Eaton AutoShift 10 speed transmission (SOLD)
Location: Evergreen, CO
Contact:

Re: WHICH ENGINE???

Post by beltguy »

Hi Bill

I posted the following on the MAK board on July 20, 2006

>>>>>>>MAK post>>>>>

I am still on my way back from BusN USA.

I got to Ogden a little early (pick up Pat tonight from her convention) and decided to go to a truck wrecking yard to look for a part. Found a truck with an AutoShift and had to ask what he wanted for it. He said $3500 for the complete package plus some sort of core (HT740 was OK with him). I think that is a pretty good price.

Now, for the good news (and just what you engine conversion wantabes need)!!

He has 22 trucks coming in with ISM 400 HP/AutoShift combinations!! As most of you know, the ISM can go in an Eagle (and perhaps other buses) with no need to raise the bed. These would make a heck of a conversion. He said that if the person wants it all, he will sell the truck less the rear ends. That would give you most everything you need for the conversion. Didn’t ask price.

Rocky Mountain Truck Parts
Ogden, UT
801-392-1060
Toll Free: 877-393-1060
Ask for Shan

They have a website: http://www.rockymountaintruckparts.com/

>>>>>>>>>>end MAK post>>>>>>>>>

This is where Brian Diehl got his engine and transmission.

I just called them and the sets that they got are gone. However, he does have a few of the Autoshifts available and one ISM engine out of a trash truck (roll off) 280K miles.

If you are interested, give them a call. They are great folks. I would bet that they would be able to find other ISM engines as well.

Jim
Jim Shepherd
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com   NOTE this email box is only for general correspondence related to the forum and not technical advice.  Technical questions will not receive a response.
User avatar
luvrbus
Club Member
Club Member
Posts: 2981
Joined: Mon Oct 13, 2008 12:50 pm
FMCA #: F262917
Bus Model: 05

Re: WHICH ENGINE???

Post by luvrbus »

Bill,the Cat C-11 or C-9 engine will fit into your Eagle with very little modifactions to floor and is far better than the M11 or any of the I series Cummins.The floor will need work for the C-13 and C-15 but I like the C-15 good luck
User avatar
beltguy
Site Admin
Site Admin
Posts: 2663
Joined: Wed Oct 08, 2008 4:39 am
FMCA #: F246286
Bus Model: 1985 Eagle 10 with Series 60 and Eaton AutoShift 10 speed transmission (SOLD)
Location: Evergreen, CO
Contact:

Re: WHICH ENGINE???

Post by beltguy »

Clifford, did Sonnie pay you to make that post? ;)

I would suspect that that engine would be a good alternative to the ISM. I have seen several M11/ISM installations, but have not see the small Cat engine in an Eagle (or other bus).

If anyone has that installation, I would love to know details of the installation and have a few pictures. I collect information on engine conversions and would love to add this option to my collection.

I have to ask about the availability of the Cat C11. You see a lot of class 8 trucks with the M11/ISM, but I have not heard much about the C11 (my opinion is that the C9 might be a bit short of capacity of a truck or bus).

UPDATE: Ok, I did some research, and found several references to C11s in class 8 trucks. I found this link that has quite a bit of information on the C11 (for industrial application, but should pertain): http://www.zeppelin.com/ps_dnld/c11_ACERT_E-Rating.pdf

For comparison, here is a spec sheet for a Series 60: http://www.fdda.com/uploads/documents/29.pdf

I am still trying to find the dimensional specs for the ISM

Jim
Jim Shepherd
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com   NOTE this email box is only for general correspondence related to the forum and not technical advice.  Technical questions will not receive a response.
Sonnie Gray
Club Officer
Club Officer
Posts: 80
Joined: Mon Oct 13, 2008 5:29 pm
FMCA #: F215907
Bus Model: 72 0/5 Eagle 3406 Cat, 70 0/5, 85 Model 10

Re: WHICH ENGINE???

Post by Sonnie Gray »

No Jim

He also knows what a REAL ENGINE is.

Sonnie & Patti Gray
72 0/5 Eagle 3406 Cat
Pottsboro, Texas
Post Reply