Website Home | Info & Posts | Club Membership | Eagle History | Contact Us

Wiring Question

This is a public forum to discuss Eagle related technical issues. If you are having a problem with your Eagle, this is the place to find help.
Wiring Question
Tue Nov 25, 2008 5:10 am


While I was sorting out my dash wires I found wire 35 going in the front loom to the dash. My 01 schematic does not show it, my other schematic 7444-7543 shows it going to the stop lights from the resistors, nothing going to the dash loom. There is no indication of a switch or light in that curcuit. I did trace it and it does go from the dash loom to the the loom that goes to the rear. What the heck does it go to? I just don't like having an extra wire that I don't know what it's for. If I can't find out I'll just use it as a spare. It just doesn't make any sense to me.

Thanks
Becky & Paul Lawry
Dreamscape
1968 Eagle 01 #7443
Silver 8V92 HT 740

Dreamscape Eagle Travel Blog: https://dreamscapetravels.wordpress.com/

Dreamscape Build Blog: https://dreamscapesilvereagle.wordpress.com/
User avatar
Dreamscape
 
Posts: 3021
Joined: Mon Oct 13, 2008 1:03 pm
Location: Full Timing - On The Road


Re: Wiring Question
Tue Nov 25, 2008 2:08 pm


Hi paul,have you checked with a meter for power ,could it possibly be the lead for the brake light on the dash ,maybe even a ground lead?good luck :)
van
Club Member
Club Member
 
Posts: 1437
Joined: Mon Oct 13, 2008 1:35 pm



Return to Eagle Tech

Who is online

Users browsing this forum: No registered users and 2 guests